Skip to main content

Veteran-owned • Handcrafted in Loveland, Colorado • Since 1976

800-303-5703 Gift certificates Contact us

Toggle menu

Our Craft

Lost-wax casting.

This is how our bronze buckles are cast: wax copies, a plaster-like shell, an overnight burnout, and molten bronze.

Why it’s called lost wax

The wax melts away. The detail stays.

Wax copies of the buckle are set in a plaster-type material called investment. When the wax melts out, it leaves its impression behind — hence the name.

Then molten bronze fills every nook and cranny of that impression. We perfected the process on Big Red, a one-of-a-kind vacuum induction machine originally built for NASA.

Casting

From wax to bronze.

  • 1. Perfect waxes

    Perfect waxes come from centrifugal force.

  • 2. Treed

    The waxes are “treed” to fit into our casting cans.

  • 3. Investment

    A plaster-type material called investment is poured around the waxes.

  • 4. Lost wax

    Once the plaster solidifies, the wax is melted out in the steam oven, the pregame to the burnout oven — hence the name. The clear plastic sleeve comes off.

  • 5. Overnight burnout

    In the burnout oven overnight, the temperature slowly rises to bring the inside of each can close to casting temperature. The heat also activates the investment to allow proper air flow.

  • 6. Metal matched

    Granulated metal has already been weighed out and matched to each can.

  • 7. Casting

    One at a time, the cans go into our casting machine, and molten bronze fills every nook and cranny the wax left behind.

  • 8. Cool & quench

    The cans cool briefly, then get quenched in big barrels of cold water. The temperature shock breaks the investment off the buckles.

Finishing

Finished by hand.

Every buckle gets the same hands-on finish, one step at a time.

  • 1. Dry

    Wet buckles dry for 24 hours.

  • 2. Sandblast

    Sandblasting cleans off the leftover investment.

  • 3. Trim the sprues

    Buckles are taken off the tree with the cutoff wheel, then the bandsaw takes the sprue off.

  • 4. Drill the boss

    The boss is drilled so the bail can be placed later.

  • 5. Darken

    Buckles go into a chemical darkening solution, then dry.

  • 6. Buff

    In the buffing room, buckles may hit any number of buffing wheels, depending on the finish.

  • 7. Bend

    Buckles are bent.

  • 8. Add the bail

    Wire bails are added.

  • 9. Number

    If requested, they’re serially numbered.

  • 10. Clearcoat

    A clearcoat protects the finish.

  • 11. Finished

    The finished product, ready to wear.

Silver alloy

Same finish, different casting.

Silver alloy buckles finish the same way bronze does, but the casting process is different. Lower melting points make this “soft” metal capable of casting directly into molds.

Our Craft

Keep exploring.

Superior craftsmanship since 1976

Let’s make you a buckle worth keeping.

Start with our signature Collection, or bring us your idea — even a sketch on a napkin works. We’ll design it and cast it for you.