Our Craft
Silver alloy spin casting.
Lower melting points make silver alloy a “soft” metal that can be cast directly into the mold, no wax needed. From there, it’s finished the same way as our bronze buckles.
Casting
Straight into the mold.
-
1. Melt
Silver alloy bars are melted in a pot at 550°F.
-
2. Pour
Using the same style of centrifuge casting machine, we pour the molten alloy straight into the mold — with a metal ladle, not by hand.
-
3. Spin & cool
The spin cycle is about 3 minutes, and the molds cool a few minutes before we open them.
-
4. Pull the design
The alloy is soft enough to break off the design we need by hand, and we quickly melt back the ones we don’t need.
FINISHING
Finished by hand.
From here, silver alloy buckles get the same hands-on finish as bronze.
-
1. Trim the sprues
Buckles are taken off the tree with the cutoff wheel, then the bandsaw takes the sprue off.
-
2. Drill the boss
The boss is drilled so the bail can be placed later.
-
3. Darken
Buckles go into a chemical darkening solution, then dry.
-
4. Buff
In the buffing room, buckles may hit any number of buffing wheels, depending on the finish.
-
5. Bend
Buckles are bent.
-
6. Add the bail
Wire bails are added.
-
7. Number
If requested, they’re serially numbered.
-
8. Clearcoat
A clearcoat protects the finish.
-
9. Finished
The finished product, ready to wear.
Good to know
Is silver alloy right for your design?
Silver alloy is a “soft” metal, so not every design is a good fit. Buckles that need a lot of polishing can have fine-line details buffed out.
Hard wear can weaken the hook, and wearing it too tight can pull and distort the bail. If anything starts to give, reach out before you lose your buckle in the field — silver alloy is covered by our lifetime warranty.
Hard wear can weaken the hook, and wearing it too tight can pull and distort the bail. If anything starts to give, reach out before you lose your buckle in the field — silver alloy is covered by our lifetime warranty.
Our Craft
Keep exploring.
-
-
Mold Making
Standard, 3D printed, and hand-sculpted molds, from first artwork to wax replicas.
See mold making -
Superior craftsmanship since 1976
Let’s make you a buckle worth keeping.
Start with our signature Collection, or bring us your idea — even a sketch on a napkin works. We’ll design it and cast it for you.