Skip to main content

Veteran-owned • Handcrafted in Loveland, Colorado • Since 1976

800-303-5703 Gift certificates Contact us

Toggle menu

Our Craft

Mold making.

Every design begins as a hand-built master mold — the piece that shapes every buckle after it. Depending on the detail a design needs, we build it in one of three ways.

Three ways in

Three ways to make a master.

Method 1

Standard mold.

From the first idea to wax replicas, ready for casting.

  • 1. Inspiration

    Every design starts with an idea.

  • 2. Black & white artwork

    The artwork is rendered in black and white.

  • 3. Acid-etched plate

    The artwork is acid-etched onto a magnesium plate.

  • 4. Hand texturing

    The plate is textured by hand.

  • 5. Bandsaw cutting

    The plate is cut out on the bandsaw.

  • 6. Front plate ready

    The border is buffed, and the front plate is ready to go.

  • 7. The back

    The back of the buckle needs texture, nameplates, and hardware.

  • 8. Into the rubber

    The rigid parts are laid out on soft rubber sheets, and more rubber goes on top.

  • 9. The vulcanizer

    It’s closed up and cooked for about 2 hours at 375°F with 2,500 lbs of pressure.

  • 10. Cracked open

    Once it cools, the mold is cracked open and the metal parts come out.

  • 11. Cut for flow

    We cut the mold so the metal flows properly. Then the recessed areas are ready for wax or silver alloy.

  • 12. Wax replicas

    Spin molds go into the spin caster, and molten wax is poured in. Once it cools, the wax replicas head to the casting room for the lost-wax process.

Method 2

3D printed.

For more layers of detail or texture. It’s newer for us, from the last year or two: we sculpt the design digitally and print it, which is faster and more affordable than sculpting by hand. Here’s how a nurses’ coin for Children’s Hospital came together, start to finish.

  • 1. Customer art

    This customer had a design they wanted updated and recreated.

  • 2. Working in ZBrush

    The design is sculpted digitally in ZBrush.

  • 3. Slicer software

    The 3D file goes into the slicer software to get the size dialed in and create the build supports for the 3D printer.

  • 4. The 3D printer

    A super high-end resin printer. Buckles take about 24 hours each to print.

  • 5. Cleaned & trimmed

    Dark purple resin prints are cleaned and trimmed. This special resin works with our molding process; not all 3D prints can do that. It’s what lets us create beautiful 3D buckles at a fraction of the cost of hand sculpting.

  • 6. The master mold

    The resin master leaves its negative impression in the master rubber mold. Now it’s ready for production.

  • 7. Finished in bronze

    The finished product, cast in bronze.

Method 3

Hand-sculpted.

When a design can’t be modeled in 3D, our artist builds the detail by hand in wax, right on a magnesium plate. Before 2026, nearly every textured buckle in our catalog was made this way.

  • 1. Concept art

    It starts with the concept art.

  • 2. Sculpted

    The design is sculpted by hand, directly on a magnesium plate or in wax or clay.

  • 3. Poured mold

    We usually build a box, but anything that can hold the rubber while it cures works (this one’s a PVC tube). Once it cures, the mold comes off with a negative imprint of the sculpt, and wax is poured in to capture the details.

  • 4. Cast in bronze

    That wax is cast using the lost-wax method to become a bronze for molding. This one is freshly cracked; the rubber discolors the bronze during vulcanizing.

  • 5. Production plate

    The bronze is placed on the magnesium plate for making the production mold.

  • 6. Finished Buckle

    After finishing the buckle, it is ready to wear.

THEN

The production mold.

  • Each new buckle gets one spot in our 12-inch round production molds. We need enough new designs to fill one before we make it.

  • From there, the mold makes the wax copies (or, for silver alloy, takes the molten metal itself).

Our Craft

Keep exploring.

Superior craftsmanship since 1976

Let’s make you a buckle worth keeping.

Start with our signature Collection, or bring us your idea — even a sketch on a napkin works. We’ll design it and cast it for you.